Confusion in Blow Mold Machine Names

• Injection Blow Molding (IBM)
• Extrusion Blow Molding (EBM)
• Injection Stretch Blow Molding (ISBM)
• Reheat Stretch Blow Molding (RHSB)

These terms are used on a daily basis in the plastic blow molding machine business.  They can be very confusing to blow molding machinery users.

Many users mix up Injection Stretch Blow Molding (ISBM) and Injection Blow Molding (IBM) in particular.  The difference between these two is the word “stretch”, which refers almost exclusively to PET which is stretched to give added strength.  HDPE and PP are rarely “stretched”, but injection blow molded without “stretch”.  The neck is injected, and the body blown in the same process (IBM).

View Original Source: http://www.petallmfg.com/blog/confusion-in-blow-mold-machine-names/

Contact Details:
Pet All Manufacturing Inc.
85 Royal Crest Court, Units 1 & 2 Markham,
Ontario, L3R 9X5
Phone: (905) 305-1797
Web: http://www.petallmfg.com/
Email: cmerrick@petallmfg.com

Electric Injection Blow Molding

The CanMold brand, owned by Pet All Manufacturing is one of only 2 companies in the world offering fully electric injection blow molding machinery. We are the only company offering larger machines of 135 ton and 189 ton in full electric version.

The machine is offered in all the sizes shown in the attached chart and offers large advantages over standard hydraulic blow molding technology.  A few of these advantages are as follows:

1. Power consumption on the 88 Ton machine (9 cavity mold with 150ml container) is 14.5 KW, whereas a standard machine, which is fully hydraulic, has a requirement of 27 KW.
2. Production cycle is 2-3 seconds faster on the full electric than the standard hydraulic unit.
3. The full electric uses no hydraulic oil and offers complete clean room cleanliness and no risk of product contamination from oil.

View Original Source: http://www.petallmfg.com/blog/electric-injection-blow-molding/

Contact Details:
Pet All Manufacturing Inc.
85 Royal Crest Court, Units 1 & 2 Markham,
Ontario, L3R 9X5
Phone: (905) 305-1797
Web: http://www.petallmfg.com/
Email: cmerrick@petallmfg.com